Tools & Tuning

Fluor Free Hydrocarbon wax 0°C to +10°C. Soft wax for wet snow. Good for first base prep of new skis. - A versatile wax for warm conditions - Ideal for base prep and training use Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp.: 120°C (248°F). CH10X is made slightly harder than the old CH10. Test results show that a harder wax performs better in very wet saturated snow. The adjusted hardness makes CH10X more durable than before. A good wax for base prep and training. For racing, we recommend to go with fluoro wax in this temperature area. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

Fluor Free Hydrocarbon wax -2°C to -8°C. Good training wax. Easy to warm in. Good in dry conditions. - A great wax for typical winter conditions - Medium hard and easy to apply - Versatile base prep, training, and racing wax Temperature range from -2°C to -8°C (28°F to 18°F). Recommended iron temp.: 140°C (284°F). A wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. CH07X is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

Ergonomic file holder with 80 mm file. Side-edge 87 and 88 degrees. Easy to work with. Highlights - 3 in 1 - Ergonomic file holder - Diamond stone and abrasive stone - Steel edge maintenance - Fits pocket - A must-have for alpine skiers - Also for randonee skis - Made for Base Preparation

Base cleaner kit for cleaning the ski base and for wax and klister removal. Comprises a 150 ml base cleaner aerosol and 20 m Fiberlene cloth. Practically odorless. Spray on the base, remove as much wax as possible with a scraper and wipe with Fiberlene. A dirty base is a slow base – so keep the base clean!

Side edge file guide in handy pocket size and ergonomic design for a secure grip. The side edge can be set to either 87 or 88 degrees. 40mm quality file included - 40mm quality file included

Steel scraper for experienced waxers. Sharp steel scraper for peeling or straightening bases.

6”/15 cm. 16 tpcm. Fine. Non chromed file. Works great for side-edge beveling.

Medium coarse file, not chrome-plated. 20 cm, 12.5 tpcm. Good for filing both side edges and base edges. - File for treating steel edges - For snowboards and alpine skis - For all maintenance of steel edges - Sharp and exact

Good wax iron for alpine and cross country skis. 110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustment wheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).

It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220.

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

Coarse Diamond Stone with plastic support. Red. 100 mm. Deburring and maintenance stone. Works great for maintaining sharpness and smoothness. Good price.

Medium diamond grindstone for skis and snowboards. 100 mm. Medium diamond grindstone with plastic plate. Yellow. 100 mm. The grindstone is used to tune the edges. Red and yellow are the two grindstones you must have. Great value. - Diamond file - For snowboards and alpine skis - For alpine skiers and snowboarders - Sharp and exact

Fine diamond stone for sharpening steel edges. 100 mm. - Diamond file - For snowboards and alpine skis - For alpine skiers and snowboarders - Sharp and exact

Universal glide wax that quickly and easily provides great glide for skis and snowboards. - Universal glide wax - For all conditions - For those who want a better skiing experience - Easy to work with

The UR range is a range of fluoro-free glide wax for training and racing. - An extra soft glide wax - For warm conditions - For those who want a better skiing experience - High durability

The UR range is a range of fluoro-free glide wax for training and racing. - A hard glide wax - For cold conditions - For those who want a better skiing experience - High durability