Brakes/Levers/Pads

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included

• 140mm CenterLock Ice-Tech Rotor • Aluminum core construction • Lowers operating temperature • Resists power fade • Increases pad life

Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

Shimano XT RT81 Centerlock Disc Rotors - 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors - Aluminum spider - Includes standard type rotor lockring - Requires external-type rotor lockring when installing onto 15/20mm axle hub

Shimano Deore XT SM-RT86 6-Bolt rotors feature a 3-layer construction with an aluminum core and two stainless steel outer layers. Reducing rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors, the result is better braking performance and reduced brake fade. - Aluminum spider - Includes rotor fixing bolts and locking washers

- Better Control And Confidence In Race Conditions - Optimally Balanced Hydraulic Brake System For Racing - Light Weight - Improved Heat Dissipation - Ice Technologies Freeza - Simple Set Up And Maintenance - Easy Tool Access - Flat Mount System - Easy Wheel Replacement - Wide Pad Clearance And Chamfer Of Brake Pads - Easy And Clean Bleeding Process - One Way Bleeding - More Controllable And Confidence In Race Condition - Designed As Optimum Balance Of Hydraulic Brake System For Racing Purpose - Dedicated Brake Lever Shape, Stroke, Contact Point, Stiffness And Dedicated Shift Paddles

With a low-profile Flat Mount design, the Shimano GRX BR-RX400 hydraulic disc brakes provide greater control for mixed terrain riding. - Excellent heat dissipation - Flat mount - Convenient tool access - Simple wheel replacement - Easy and clean bleeding system - Never hesitate to tackle rough surfaces - Simple set up and maintenance

- Pair of L-Type brake pads with fins, for one caliper - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

- Cartridges: forged aluminum cartridge holders with a threaded mounting post and standard-compound pad inserts (M70R2 versions include mounting hardware) - Inserts: replacements for worn Shimano cartridge pads (includes retention cotter pin) - Molded: 1 piece internal backbone pads with threaded post and hardware

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

- Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 140mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Weight: 96g

- Shimano's flagship disc brake rotor. Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - The inner aluminum surface of the FREEZA fins is covered with heat-dissipating paint. Providing even more colling performance to reduce brake fade. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 140mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Disc Rotor Weight: 96g

Shimano's flagship disc brake rotor. Quieter than ever, but with superb, consistent braking performance on any long, steep descents thanks to excellent heat dissipation. - The new arm shape is more robust, leading to quieter operation. - Featuring ICE TECHNOLOGIES and FREEZA; ICE TECHNOLOGIES is a proprietary fabrication technique consisting of a 3-layer aluminum and stainless-steel structure allowing for superior cooling. FREEZA are aluminum/stainless fins that support rapid heat dissipation. Combined you get longer pad life, less brake fade and substantially quieter braking. - The inner aluminum surface of the FREEZA fins is covered with heat-dissipating paint. Providing even more colling performance to reduce brake fade. - Recommended both for road or mountain bike braking systems. - Lock-ring included. - Disc Diameter: 160mm - Hub Compatibility: Center Lock - Disc Pad Type: Metal or Resin - Disc Material: Stainless steel/Aluminum - Disc Technology: Ice-Tech and Freeza - Weight: 114g

Proven in World Cup racing, Shimano's Saint Disc Brake sits at the summit of DH brake tech. The post-mount caliper is equipped with four oversize ceramic pistons for serious power blended with stellar modulation. Heat is the enemy of any braking system, so Shimano uses ICE technology with finned brake pads and a longer banjo to dissipate heat more effectively. All this leads to a brake with reduced pad wear, that doesn't fade or squeal, and leaves you in total control.

Shimano Sora BL-R3000 Road Brake Levers - Design to seamlessly function with SL-R3000 - Brake lever is compatible with a wide variety of brake calipers - Not compatible with linear-pull brakes - Brake Lever Actuation: Short Pull

The Ultegra BR-R8170 disc brake caliper brings a new level of control to the road cycling world with enhanced modulation and a quicker initial braking point. Despite its smaller construction, the system is quiet and easy to maintain. - Wider pad clearance decreases brake noise - Maintenance-friendly bleeding process

Shimano BR-RS785 Hydraulic Road Disc Brake Calipers - Brake Caliper Type: Post Mount - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: Mineral Oil - Pad Compound: Resin - Weight: 135 g

Shimano's Ultegra Brake Calipers feature lightweight, stiff, cold-forged aluminum arms and a symmetrical dual-pivot design with twin bearings for smooth, easy operation with modulation and power to spare. Pair them with Shimano's Ultegra polymer-coated brake cable and scrubbing speed feels almost effortless. Setup is fast and simple with cartridge brake pads equipped with conical washers.

Shimano Ultegra R8010 direct-mount type brake caliper. - Direct mount brake - Direct brake mounts connect directly to the frame to reduce redundant parts and increase overall braking performance - Sleek design - Narrower gap between arms - Wider clearance with larger tire sizes - Compatible with wider 28c tire size - Model Number: BR-R8010-F - Series: Ultegra - Brake Type: Direct mount type - Average Weight: 174 grams

Shimano Ultegra R8070 flat mount hydraulic disc brake caliper. - Model Number: BR-R8070 - Brake Type: Hydraulic disc brake - Average Weight: 280 g/pair - Greater rider control in all conditions - Hydraulic disc brake provides the next stage of control - Sleek integration into a road bike's aero profile - Designed to integrate seamlessly with a road bike's profile - Flat mount hydraulic type - Better heat dispersion than current road disc systems (SM-RT800) - New construction provides better heat management than current ICE TECHNOLOGIES FREEZA

Shimano Ultegra RT800 centerlock disc rotors. - Aluminum spider - Includes standard type rotor lockring - Freeza technology, 3-layer structure with aluminum core and stainless steel outer layers and additional aluminum cooling fins reduces rotor surface temperature approximately 150 degrees Celsius compared to all-steel rotors - Requires external-type rotor lockring when installing onto 15/20mm axle hub - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds - Rotor Type: Two Piece

The Deore XT M8100 hydraulic disc brake is designed to provide high performance braking for a variety of MTB riding styles. Includes the brake lever and disc brake caliper. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8100 2-piston brake caliper is optimized for cross country riding styles - Includes finned metal pads and hose - Brake Caliper Type: Post Mount - Hydraulic Hose Length: 1000mm (Front) / 1700mm (Rear) - Hydraulic Fluid Type: Mineral Oil - Rotor Included: No - Pad Compound: Metallic

- XT-grade 6-bolt rotor - Stainless steel braking surface for long lasting durability - Cutouts help with mud clearing and cooling - Large forged alloy spider supports rotor surface, increasing rigidity and heat dissipation while reducing weight - Comes complete with mounting hardware

Shimano XT SM-RT76 6-Bolt Disc Brake Rotors Are Available in 160mm, 180mm, & 203mm. - Performance indicator: advanced (level 2 out of 3) - Self cleaning - Increased durability and less pad wear - Mount: 6-bolt - Diameter: 160 mm, 180 mm, 203 mm - Deisgn: 2-part - Material: stainless steel - Brake Pads Compatability: Metal, Resin

- XTR M9120 brake lever and M9120 4-piston hydraulic disc brake caliper - Increased stopping power & improved modulation for greater dowhnill confidence and control - Additional contact point on handlebar increases stiffness by 8% vs BL-M9020 - Quicker engagement & shorter, adjustable free stroke - ServoWave technology - Toolless adjustable reach - Pre-assembled with SM-BH90-SBM high power hose - Includes N04C metal pads w/ fins - Weight: 385g per side (lever, caliper, hose & RT-MT900 rotor)

The pinnacle in mountain bike braking, SHIMANO XTR RT-MT900 disc brake rotors deliver superb stopping power for the most aggressive riding. The ICE TECHNOLOGIES FREEZA rotors dissipate heat to maintain braking performance on long downhill stretches. SHIMANO's CENTER LOCK mounting system makes installing and removing rotors quick and easy thanks to the spine mount and lock ring design. High-performance and consistent brake performance - Stable and versatile brake performance in the most demanding conditions New ICE TECHNOLOGIES FREEZA construction for boosting heat dissipation - Surface temperature cooled by -20°C (vs RT99, 203 mm) Rotor size - 160 mm, 180 mm, 203 mm

XTR RT-MT900 rotors offer stable and versatile braking performance in the most demanding MTB conditions. - Center Lock design (alloy lockring included) - Incorporates Ice Technologies Freeza construction for superior heat dissipation - Compatible with both metal and resin brake pads